Step 1: Connect the Receiver to a Monitor or TV
Use the HDMI cable (included) to connect your farmCam HD Receiver to the TV HDMI port.
Alternatively use VGA: Use the VGA cable to connect your farmCam HD Receiver to the VGA port of TV or Monitor.
Step 2: Connect the IP Camera Power Adapter
Connect the camera’s power adapter to power the camera, please use 12V/1A Power Adapter (included)
Step 3: Connect to your network
Connect an Ethernet cable from the LAN port of the farmCam HD Receiver to LAN port of your router.
Step 4: Connect the Mouse
Connect the mouse to the USB Port.
Step 5: Connect the Receiver Power Adapter.
Connect the Receiver power adapter to power the Receiver, please use 12V/2A Power Adapter (included).
Step 6: Install the Outdoor Antennas
Tip: Place the outdoor antennas on the outer wall of the buildings, with as few obstacles between them as possible.
Please find a more detailed antenna installation guide below:
http://support.luda.farm/support/solutions/articles/14000073666-antenna-installation-guide/