If you want the Receiver to send email alerts as alarm events are detected, you need to configure an outgoing email server for the Receiver and choose an email address for it.
We recommend creating a dedicated Gmail account specifically for the Receiver. Note! If you experience problems with email notifications set the Gmail security level to “Allow less secure apps” at https://myaccount.google.com/lesssecureapps
SMTP Server: You can choose a smtp-server of your choice. We recommend using Gmail (smtp.gmail.com).
SMTP Port: The SMTP port used by the email provider of your choice. The default for Gmail is 465.
Sender Address: The address you are sending the email from. This will be the username you have set up for the email server you are using, For example: “youraddress@gmail.com” or similar.
Password: The password for the outgoing email account.
Recipient Address: The email address you want the receiver to send emails to. Up to three email addresses can get motion notifications.
Interval: The length of time that must elapse after the receiver sends an email alert before it will send another.
Attach Picture: Check this box to send a picture attachment via email.
Email test: To check if you have set up the email alerts properly, click the Test button. After a short delay, you will receive an e-mail in your inbox (Recipient Address) informing you that email alerts from the receiver has been set up. If the test is unsuccessful, please check your sender’s address/password and recipient’s address(es) and try again. Please also make sure to set the Gmail security level to “Allow less secure apps”.