You can use up to 3 additional cameras with your trailerCam solution. We recommend that you pair the camera with your monitor before mounting it on your machine.

Pairing camera and monitor

     
  1. Connect the camera to a power source according to the instructions in on page 7.
    2.  
  2. On the monitor, click the PAIR/CH button and go to the channel where you wish to install your camera.
    3.  
  3. Press and hold the PAIR/CH button until the numbers start counting down.
    4.  
  4. Within the 60 second countdown, press and hold the button on the back of the camera until the text “SAVE DATA” is shown.
    5.  
  5. Mount the camera in the desired position after making sure the signal strength is good enough.

Switching between the cameras on the monitor

Press PAIR/CH