LiftCam Pro - FAQ & Troubleshooting
Problem
Possible error
Action
I can’t see the camera image on the monitor
The monitor is completely dark.
The monito...
Fri, 15 Jul, 2016 at 7:02 PM
The trick is to wait until the pairing countdown is shown and then connect the power to the camera. If the power is already on it won’t auto pair. If it’s no...
Fri, 15 Jul, 2016 at 6:29 PM
Yes, if you insert a micro SD card into the monitor. See the “Installing an SD card” and “Menu options/Record” sections.
Fri, 15 Jul, 2016 at 6:28 PM
Yes, it is IP69K classed which means it can be placed outside exposed to the weather and even cleaned using a pressure washer.
Fri, 15 Jul, 2016 at 6:31 PM
Yes, if you are using the cigarette power outlet for the monitor, and the PowerBank battery for the camera, the system is completely flexible and can be fre...
Wed, 11 Oct, 2017 at 12:42 PM
No, that is not possible.
Fri, 15 Jul, 2016 at 6:45 PM
The extended magnetic antenna (art. no. 5027) fits with both the camera and the monitor. However, placing the antenna on the transmitting (camera) side will ...
Fri, 15 Jul, 2016 at 6:47 PM
This occurs as the signal reception is depending on the surroundings. You can improve the general signal reception by using a larger antenna.
Fri, 15 Jul, 2016 at 6:48 PM
Yes, you can have up to 4 cameras connected to the same monitor.
Fri, 15 Jul, 2016 at 6:46 PM
No, that is not possible.
Fri, 15 Jul, 2016 at 6:49 PM